Advertisement
What's in the Box
To Order Parts: www.beoplay.com
Volume -/+
Power and Сonnection
Bluetooth® pairing
Connect to mains supply.
- Press and hold
![]()
for 2 seconds until you hear a sound prompt and the indicator flashes blue, and release the button. - Activate Bluetooth on your device. Select BeoPlay S3 from the device list. When the indicator turns solid blue and you hear a sound prompt, pairing is completed.
for 2 seconds until you hear a sound prompt and the indicator flashes blue, and release the button.True Wireless setup
Use True Wireless to connect two speakers wirelessly. Press and hold 
on the first speaker for 5 seconds. Wait until a second sound prompt is heard and the indicator flashes white. Then release the button. This speaker becomes the Master speaker and plays audio on the left channel. The device you are playing must be connected to the Master speaker through Bluetooth. Wait for 20 seconds until you hear a sound prompt.
Then, continue to set up the second speaker.
On the second speaker, press and hold for 5 seconds until the indicator flashes white. Then release the button. This speaker will connect to the Master speaker. When the connection is successful, the indicator turns solid white, and sound prompts are heard on both speakers. This speaker will play audio on the right channel.
Multiple speakers
![Multiple speakers - Step 1]( "Bang & Olufsen - BeoPlay S3 - Multiple speakers - Step 1")
You can connect up to four BeoPlay S3 through the Line sockets using accessory audio cables (see above). The first speaker is Master and distributes sound to the connected speakers. The device you are playing from must be connected to the Master through Bluetooth or cable. For synchronisation, see the following pages.
![Multiple speakers - Step 2]( "Bang & Olufsen - BeoPlay S3 - Multiple speakers - Step 2")
Press and hold![]()
for 8 seconds until you hear the third sound prompt and the indicator flashes orange. Repeat the sequence on the rest of the speakers. Lastly, select the first speaker to become Master by pressing ![]()
shortly, and all indicators turn solid orange.
Pairing modes
Press and hold 
to step through the pairing modes. If you step too far, press shortly and start again. You hear a sound prompt when each mode is reached.
 |
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the BeoPlay S3 and is the answer not in the manual?
Questions and answers