Technical Data - DeWalt DCM565 Manual

EnGLIsh
18V CHAINSAW
DCM565
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Battery type
Bar Length
Maximum Chain Speed (no‑load)
Maximum Cutting Length
Oil Capacity
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841‑4‑1.
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
36
EC‑Declaration of Conformity
o
Machinery Directive
WALT one of the
e
18V Chainsaw
DCM565
DCM565
V 18
DC
WALT declares that these products described under Technical
D
e
Li‑Ion
Data are in compliance with:
cm 30
2006/42/EC, EN62841-1:2015, EN62841-4-1:2020.
m/s 7.3
cm 26
ml 115
These products also comply with Directive 2014/30/EU and
kg 3.7
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
dB(A) 89.5
file and makes this declaration on behalf of D
dB(A) 99.0
dB(A) 3.0
m/s 2 3.7
m/s 2 1.5
Markus Rompel
Vice-President Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
65510, Idstein, Germany
25.08.2021
18V Chainsaw
DCM565
D WALT declares that these products described under "technical
e
data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I. 2008/1597
(as amended), EN 62841-1:2015+A11:2022, EN62841-4-1:2020.
The Noise Emission in the Environment by Equipment for use
Outdoors Regulations 2001, S.I. 2001/1701 (as amended),
These products conform to the following UK Regulations
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended).
2000/14/EC, Annex V
L (measured sound pressure level) 89.5 dB(A)
PA
L (guaranteed sound power) 102.0 dB(A)
WA
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
Schedule 8.
L (measured sound pressure level) 89.5 dB(A)
PA
L (guaranteed sound power) 102.0 dB(A)
WA
WALT at
e
WALT.
e