Table of Contents
Advertisement
INSTRUMENT
INPUT
Parameter
Value
(Bold: default)
Selects the input source.
INST
INPUT
HEAD SET
OFF
GAIN
-20–0–+20 dB
EQ
Parameter
Value
(Bold: default)
OFF, ON
(ON/OFF)
LOW
-20–0–+20 dB
LOW MID
-20–0–+20 dB
FREQ
20.0–500
Q
0.5–1–16
HIGH MID
-20–0–+20 dB
FREQ
20.0–500
Q
0.5–1–16
HIGH
-20–0–+20 dB
LOW CUT
FLAT,
20.0–80
HIGH CUT
20.0 Hz–16.0 kHz,
PAN
L50–CENTER–R50
EFFECTS
Parameter
Value
(Bold: default)
OFF, ON
(ON/OFF)
Selects an effect category.
EFFECTS
TALK
CATEGORY
CONSOLE
When the effects category is "TALK"
This shows the edit screen for the effect patch.
Ø
"Effect Parameters" (p. 27)
EFFECTS CATEGORY: TALK
PRESET: P001–030
PATCH
USER: U001–200
Effect parameters
EFFECTS CATEGORY: CONSOLE
Ø
Effect Parameters
"EFFECTS CATEGORY: CONSOLE" (p. 68)
Explanation
keyboard or audio equipment connected to the MIC 1, 2 connectors
Headset mic
* You can set "HEAD SET" for just one channel.
Off (no used)
Adjusts the input gain.
Explanation
Turns EQ on/off.
Adjusts the gain for the low frequency range.
Adjusts the gain for the low-middle frequency range.
Hz–16.0 kHz
Specifies the center of the frequency range that will be adjusted by the LO MID.
Adjusts the width of the area affected by the EQ centered at the LO MID FREQ.
Higher values will narrow the area.
Adjusts the gain for the high-middle frequency range.
Hz–16.0 kHz
Specifies the center of the frequency range that will be adjusted by the HI MID.
Adjusts the width of the area affected by the EQ centered at the HI MID FREQ.
Higher values will narrow the area.
Adjusts the gain for the high frequency range.
Specifies the frequency at which the low cut filter begins to take effect.
Hz–16.0 kHz
When "FLAT" is selected, the low cut filter will have no effect.
Specifies the frequency at which the high cut filter begins to take effect.
FLAT
When "FLAT" is selected, the high cut filter will have no effect.
Sets the stereo location (pan) of the sound.
Explanation
Turns EFFECTS on/off.
Selects effect patches for conversations.
This effect is shared between channel 1–INSTRUMENT channel.
Selects the effect patch.
Configures the typical parameters for the effects that are switched to "ON", for the currently
selected effect patch.
Ï
* A
mark is shown in "Effect Parameters" > "EFFECTS CATEGORY: TALK" (p. 60) for the
typical parameters of each effect.
Edits the effect. The parameters can be configured for each channel.
* Edited settings are saved as-is.
CHANNEL
5
Advertisement
Table of Contents
