Table of Contents
Advertisement
OUTPUT
USB MAIN, USB MONITOR
EQ
Parameter
Value
(ON/OFF)
OFF, ON
LOW
-20–0–+20 dB
LOW MID
-20–0–+20 dB
FREQ
20.0–500
Q
0.5–1–16
HIGH MID
-20–0–+20 dB
FREQ
20.0–500
Q
0.5–1–16
HIGH
-20–0–+20 dB
LOW CUT
FLAT,
20.0–80
HIGH CUT
20.0 Hz–16.0 kHz,
GENERAL
Parameter
Value
LEVEL
-INF–0
MONOMIX
OFF, ON
USB AUX IN
Parameter
Value
LEVEL
-INF–0
TALKBACK
Parameter
Value
OFF, ON
(ON/OFF)
CH1–4, USB, MOBILE,
CHANNEL
BLUETOOTH
AUX IN
HEAD
AUX GAIN
-20–0–+20 dB
THRU OUT
OFF, -20–0 dB
Sets the output destination for the talkback audio.
MAIN
OUTPUT
MONITOR
MAIN+MONITOR
24
Explanation
(Bold: default)
Turns EQ on/off.
Adjusts the gain for the low frequency range.
Adjusts the gain for the low-middle frequency range.
Hz–16.0 kHz
Specifies the center of the frequency range that will be adjusted by the LO MID.
Adjusts the width of the area affected by the EQ centered at the LO MID FREQ.
Higher values will narrow the area.
Adjusts the gain for the high-middle frequency range.
Hz–16.0 kHz
Specifies the center of the frequency range that will be adjusted by the HI MID.
Adjusts the width of the area affected by the EQ centered at the HI MID FREQ.
Higher values will narrow the area.
Adjusts the gain for the high frequency range.
Specifies the frequency at which the low cut filter begins to take effect.
Hz–16.0 kHz
When "FLAT" is selected, the low cut filter will have no effect.
Specifies the frequency at which the high cut filter begins to take effect.
FLAT
When "FLAT" is selected, the high cut filter will have no effect.
Explanation
(Bold: default)
dB–+15 dB
Sets the signal output level.
Switches the signal output from USB to mono.
Explanation
(Bold: default)
dB–+15 dB
Sets the signal input level.
Explanation
(Bold: default)
Turns TALKBACK on/off.
Selects the channel for the talkback audio.
You can select multiple channels.
Selects the input source (headset mic) used exclusively for talkback.
Set this to "OFF" if you don't want to specify a function.
SET, OFF
When the same input source is set in the channel settings (p. 3, p. 5), this is
automatically set to "OFF" and the channel settings are enabled.
Adjusts the input gain for when AUX IN is used.
Sets the MAIN OUT output level for the channels not used for talkback.
The channels that aren't used for talkback can be used to play background music.
When this is "OFF", all output audio from MAIN OUT is muted when talkback is used.
Outputs to the MAIN OUT jacks and USB MAIN.
Outputs to the Headphones 1–2 jacks and USB MONITOR.
Outputs to the MAIN OUT jacks, USB MAIN, the Headphones 1–2 jacks and USB MONITOR.
Advertisement
Table of Contents
