Output; Main Out; Phones (Phones1, 2) - Boss Gigcaster 5 Parameter Manual

OUTPUT

MAIN OUT

EQ
Parameter Value
(Bold: default)
(ON/OFF) OFF, ON
LOW
-20–0–+20 dB
LOW MID
-20–0–+20 dB
FREQ
20.0–500
Q
0.5–1–16
HIGH MID -20–0–+20 dB
FREQ
20.0–500
Q
0.5–1–16
HIGH
-20–0–+20 dB
LOW CUT FLAT, 20.0–80
HIGH CUT
20.0 Hz–16.0 kHz,
GENERAL
Parameter Value
(Bold: default)
LEVEL
-INF–0 dB–+15 dB

PHONES (PHONES1, 2)

* This is shown when EQ (p. 25) of GENERAL is set to "INDIVIDUAL".
EQ
Parameter Value
(Bold: default)
(ON/OFF) OFF, ON
LOW
-20–0–+20 dB
LOW MID
-20–0–+20 dB
FREQ
20.0–500
Q
0.5–1–16
HIGH MID
-20–0–+20 dB
FREQ
20.0–500
Q
0.5–1–16
HIGH
-20–0–+20 dB
LOW CUT
FLAT, 20.0–80
HIGH CUT
20.0 Hz–16.0 kHz,
Explanation
Turns EQ on/off.
Adjusts the gain for the low frequency range.
Adjusts the gain for the low-middle frequency range.
Hz–16.0 kHz Specifies the center of the frequency range that will be adjusted by the LO MID.
Adjusts the width of the area affected by the EQ centered at the LO MID FREQ.
Higher values will narrow the area.
Adjusts the gain for the high-middle frequency range.
Hz–16.0 kHz
Specifies the center of the frequency range that will be adjusted by the HI MID.
Adjusts the width of the area affected by the EQ centered at the HI MID FREQ.
Higher values will narrow the area.
Adjusts the gain for the high frequency range.
Specifies the frequency at which the low cut filter begins to take effect.
Hz–16.0 kHz
When "FLAT" is selected, the low cut filter will have no effect.
Specifies the frequency at which the high cut filter begins to take effect.
FLAT
When "FLAT" is selected, the high cut filter will have no effect.
Explanation
Sets the signal output level.
Explanation
Turns EQ on/off.
Adjusts the gain for the low frequency range.
Adjusts the gain for the low-middle frequency range.
Hz–16.0 kHz Specifies the center of the frequency range that will be adjusted by the LO MID.
Adjusts the width of the area affected by the EQ centered at the LO MID FREQ.
Higher values will narrow the area.
Adjusts the gain for the high-middle frequency range.
Hz–16.0 kHz
Specifies the center of the frequency range that will be adjusted by the HI MID.
Adjusts the width of the area affected by the EQ centered at the HI MID FREQ.
Higher values will narrow the area.
Adjusts the gain for the high frequency range.
Specifies the frequency at which the low cut filter begins to take effect.
Hz–16.0 kHz
When "FLAT" is selected, the low cut filter will have no effect.
Specifies the frequency at which the high cut filter begins to take effect.
FLAT
When "FLAT" is selected, the high cut filter will have no effect.
23