Related Manuals for YOKOGAWA SC25V-AGP25-120
Summary of Contents for YOKOGAWA SC25V-AGP25-120
- Page 1 Instruction Model SC25V Combined 12mm sensor; Manual pH, Ref, LE and Temperature YOKOGAWA IM12B06J01-40E-E 4th edition...
- Page 2 IM12B06J01-40E-E...
-
Page 3: Table Of Contents
CONTENTS 1. PREFACE 1.1 Introduction 1.2 ATEX/IECEx compliance 1.3 Unpacking & Checking 1.4 Warranty & Service 1.5 Serial Number definition 2. GENERAL SPECIFICATIONS 2.1 Measuring elements 2.2 Construction materials 2.3 Functional specifications 2.4 Operating range 2.5 Dynamic specifications 2.6 Sensor Dimensions 2.7 Equipment and protective systems for use in potentially explosive atmospheres 3. -
Page 4: Preface
Yokogawa sales office. Make sure the Model Code on the sensor is the same as on 1.5 Serial Number definition the packing list. -
Page 5: General Specifications
Table 1: Production Year code Table 2: Production Month code Year Year code Year Year code Month Month code 2014 2026 January 2015 2027 February 2016 2028 March 2017 2029 April 2018 2030 2019 2031 June 2020 2032 July 2021 2033 August 2022... -
Page 6: Sensor Dimensions
All measuring elements within 25mm from tip. Electrical data For the models without ID-chip the I/O Dimensions in mm signals are from/to an associated intrinsically safe certified pH transmitter (e.g. Yokogawa Variopin transmitter Model FLXA21 series or IP67 Yokogawa transmitter Model PH202S series). -
Page 7: Installation
FD20 / FF20 / FS20 • FF20 flow fitting / FS20 subassembly / FD20 immersion fitting (see fig 4) Figure 4 • For mounting in Yokogawa fittings, a PG13.5 to M25 adapter is available in different materials (see fig 3). More information in SC25V chapter 7. - Page 8 Position Position 15° Minimum Figure 6 Figure 7 ø30 PG13.5 Dimensions in PG13,5 adapter mm (inches) K1523JA/JC ø30 ø36 Ø 54 PG 13.5 PG13.5 adapter K1523JB/JD Conductivity Flow Fitting 1/4” NPT FF40 3/4” NPT Ø 36 SC4A option Ø30 1/4” NPT 30 (1.18”) K1523JA K1598AC...
-
Page 9: Wiring To The Ph Analyzer
4. WIRING TO THE PH ANALYZER For wiring to the pH analyzer please check the IM 12B06W02-02E-E and the IM of the relevant analyzer. Sensor VP connection F (Temp 2) E (Temp 1) F (Temp 2/GND ID) E (Temp 1) G (VCC ID) D (LE) D (LE) -
Page 10: Model And Suffix Codes
6. MODEL AND SUFFIX CODES SC25V sensor Model Suffix Code Description SC25V Combined 12mm sensor: pH, Ref, LE, Temp. Equiped with Variopin connector Sensor type -AGP25 General purpose, Analog, IS for ATEX/IECEx -ALP25 High temp. Chemical resistant, Analog, IS for ATEX/IECEx -BGP25 General purpose, SENCOM ID-chip, IS for ATEX/IECEx -BLP25... -
Page 11: Appendix
= can be used / x = shortens useful life / - = cannot be used / Blank = no data currently available Note: Information in this list is based on our general experience and literature data and given in good faith. However Yokogawa is unable to accept responsebility for claims related to this information. IM12B06J01-40E-E... - Page 12 Yokogawa has an YOKOGAWA ELECTRIC ASIA Pte. LTD. YOKOGAWA ELECTRIC CORPORATION World Headquarters 5 Bedok South Road extensive sales and 9-32, Nakacho 2-chome, Musashino-shi Singapore 469270 distribution network. Singapore Tokyo 180-8750 www.yokogawa.com/sg Please refer to the Japan www.yokogawa.com A5 f European website (www.yokogawa.com/eu)
Need help?
Do you have a question about the SC25V-AGP25-120 and is the answer not in the manual?
Questions and answers