Pre-Operation Check; Check The Oil Level - Benchmark BP Series Manual

3. PRE-OPERATION CHECK

Inspect all components for damage and to ensure that none are missing. If you
require a replacement, do not operate this tool until all parts are present and in
proper working order.
Note
Do not modify or create accessories for this equipment. Using modi ed
components may result in damage and may void the warranty. Contact
customer service if you suspect that this equipment has been tampered
with.

3.1 CHECK THE OIL LEVEL

1.
Ensure the pump is on a level surface.
2.
Unscrew the oil cap and clean the dipstick.
3. Check the oil level by reinserting the oil cap without rethreading it. Remove
the oil cap and examine the oil level on the dipstick. If the oil level is at or
below the minimum, ll the oil reservoir up to the edge of the oil ll hole.
4. Reinsert the oil cap and tighten securely.
Note
BP271 and BP371 oil max. capacity: 20 oz. / 600 ml.
DO NOT OVERFILL.
MAX. LEVEL
MIN. LEVEL
MAX. LEVEL
MIN. LEVEL
10