Factory Settings; Technical Characteristics - urmet domus 1783 Installation Manual

Connection of 8 control cameras derived from a column interface Ref.1083/50
†
During auto-on, cameras connected to the Bus interface Ref.1783/69 are shown after the sequence
described in the system booklet at the paragraph "Auto-on function on control cameras".

FACTORY SETTINGS

The device is factory configured with following defaults:
ID
B/S
SEL/AP
TELECAMERE
ON/OFF
TELECAMERE

TECHNICAL CHARACTERISTICS

Power supply voltage: ................................................................................................................... 36 – 48 Vdc
Standby current consumption: ............................................................................................................... 10 mA
Maximum current consumption: .......................................................................................................... 100 mA
Dimensions (H x W x D): ............................................................................61 x 90 x 108 mm (6 DIN modules)
DS1783-003C
2Voice column
power supply interface
Ref.1083/20 Ref.1083/50
call modules
1
BROAD.
1 AP0
2 AP0
3 AP0
4 AP0
1 AP1
2 AP1
3 AP1
4 AP1
Bus interface
for CCTV
Ref.1783/69
ID = 1
IN1
Bus interface
IN0
for CCTV
Ref.1783/69
ID = 0
from main
control cameras
control cameras
11