Huawei PDU8000 Quick Manual page 36

Dc combiner cabinet

Hide thumbs Also See for PDU8000:

Table of Contents

PDU8000 DC Combiner Cabinet

Quick Guide

Step 2 Connect the SPD fuses FU9 and FU10.

If an SPD indicator is green, the SPD is running properly. If an SPD indicator is red,

the SPD is faulty and must be replaced immediately.

Step 3 Turn on the upstream power switch for the combiner cabinet to power on the

cabinet. If the power indicator of the combiner cabinet is on, the cabinet is

powered on properly.

Step 4 Turn on the output disconnectors in the combiner cabinet one by one to power on

the corresponding loads.

Step 5 Use a multimeter to measure the output voltage and input voltage of each

branch, which should be the same.

Figure 8-2 Output voltage measurement position of each branch

Issue 02 (2022-08-10)

NO TICE

8 Power-On Commissioning

Table of Contents