OPERATING INSTRUCTIONS
6a
BFR Therapy session:
NOTE:
For C-BFR therapy session procedures, go to step 6b
•
Touch the INFLATE button to begin a BFR therapy session
•
While the cuff is inflated, the TIME indicator will count
down the inflation time and display the exercise time
period in cyan
•
While the cuff is inflated, the REST TIME button will be
visible inside the TIME indicator
NOTE:
The REST TIME button will disappear if the remaining
inflation time is less than the rest time
NOTE:
To adjust the pressure set-point, touch the PRESSURE
button. To adjust the time set-point, touch and hold the TIME
button
NOTE:
To view the % of LOP the PTP is set to, touch the
PRESSURE button
•
Touch the DEFLATE button to deflate the cuff as necessary
•
Once the patient has completed the first repetition set,
touch the TIME button to activate the REST TIME indicator
and update the REPs indicator
NOTE:
The REPS indicator displays the number of repetition
sets and number of repetitions in each set for the selected
protocol. Values shown as: White - current set; Green -
completed set(s); Gray - uncompleted set(s)
•
While the REST TIME indicator is activated, the TIME
indicator will count down and display the rest time period
in magenta
•
When the TIME indicator counts to 0, the REPs indicator
will update, and an audio tone will sound to notify the
patient to start the next set of exercise
•
Repeat the above until all exercise sets in the selected
protocol are completed
32
OPERATING INSTRUCTIONS
2