Parameter Menus; Introduction - Mindeo ES4600 User Manual

6 Parameter Menus

6-1 Introduction

This section describes the programmable parameters, to change the parameter values.
6-2 Single-parameter setting by scanning 1D barcodes
Refer to
setting by scanning a QR code barcode
The new values replace the existing values.
To set the new values as custom default settings, scan the Write to Custom Defaults barcode.
The factory default settings or custom default settings can be recalled by scanning appropriate
barcodes, refer to
Send parameters through the TTL-level RS-232 or USB virtual COM interface. Instructions of
programming and querying the embedded scanner are described in
syntax
.
13 Return default parameters & firmware version
, scan the appropriate barcodes included in this section,
17
6-3 Multiple-parameter
and
.
8-1 Programming command