Table of Contents
Advertisement
8.5.2 Connection mode of pipe
The water inlet and outlet pipes are installed and connected as shown in the following figures.
SCV-750EB,SCV-900EB,SCV-1400EB,SCV-1800EB model uses hoop connection. For the
specifications of the water pipes and screw thread, see the Table 8-5 below.
Table 8-5
Pipe connection methods
Model
Hoop connection
SCV-750EB
Hoop connection
SCV-900EB
Hoop connection
SCV-1400EB
Hoop connection
SCV-1800EB
8.5.3 Design of the store tank in the system
kW is the unit for cooling capacity and L is the unit for G, water flow in the formula counting the minimum water flow.
Comfortable air conditioner
G= cooling capacity×3.5L
Process cooling
G= cooling capacity×7.4L
In certain occasion (especially in manufacture cooling process), for conforming the system water content requirement,
it's necessary to mount a tank equipping with a cut-off baffle at the system to avoid water short-circuit, Please see
the following schemes:
Specifications of water pipe
DN50
DN50
DN65
DN80
Fig.8-29
31
Specifications of screw thread
/
/
/
/
Advertisement
Table of Contents
