Table of Contents
Advertisement
2. Press the Menu button, select the Management menu, and press
3. Select the User's Logo setting and press
4. Select Start Setting and press
You see a prompt asking if you want to use the displayed image as a user's logo.
Note: When you select User's Logo, adjustments such as Geometry Correction, E-Zoom,
Aspect, and Screen Type are temporarily canceled.
5. Select Yes and press
Note: Depending on the image signal, the screen size may change to match the resolution of the
image signal.
6. Make sure the image appears as you want it, then select Yes again and press
You see a completion message.
7. Press Esc to exit the message screen.
Enter.
Enter.
Enter.
177
Enter.
Enter.
Advertisement
Table of Contents
