Advertisement
toggle between EQ settings, each press will toggle from
Flat, Classic, Pop, Rock, to off.
Angle:
Allows the viewer to view the DVD at
14.
different angles if the DVD is recorded with this feature.
Press the angle button while the DVD is Stopped. Then
/
to adjust the brightness and contrast
press the
levels.
Disp/Clock:
15.
Press to display the Clock or Disc
information. Setting the clock: Press and hold the
Disp/Clock button until the display begins to flash. Press
/
to adjust the hours or minutes.
the #6
Subtitle:
16.
Changes the subtitles language on the
DVD if the DVD is recorded with this feature.
Title:
17.
Displays the title that is stored on the
CD/DVD.
Setup:
18.
Displays the setup menu.
19. 0-9:
Numeric key buttons.
20. M1-M6:
Selects the Radio stations stored in the
memory.
21. Scan:
Scans the entire disc and plays the first
10 seconds of each track.
22. Repeat:
Replays the current disc or track.
23. Random:
Plays the disc in random.
24. Disc- / Disc+:
Chooses the CD/DVD, ( only if CDC or
DVDC is connected.
25. Reset:
Reset button, press only if the unit is
locked up. This resets the unit to the factory settings.
26. Remote IR:
Receiving sensor for the remote control.
27. Display:
Main unit display
28. Eject:
Eject the CD or DVD
29. Smart Mode / Disc: Press the Smart mode button to put the
unit into Smart mode. See Smart mode function. In DVD
changer mode ( Only if DVDC is connected ) press the button
to enter the Disc Menu.
1
SCN
RND
D.DN
29
9
AS/PS
11
5
6
13
DSP
16
17
18
14
4
5
CLK
15
RPT
D.UP
19
10
8
7
2
12
5
Advertisement
