Safe Operation Of Battery Chargers - Parkside PBSA 20-Li A1 Translation Of The Original Instructions

Special safety warnings for
battery-operated tools
Make sure the device is
•
switched off before in-
serting the battery. In-
serting a battery into a power
tool that is switched on may
result in accidents.
Recharge the batteries
•
indoors only because
the battery charger is
designed for indoor use
only. Danger of electric
shock.
To reduce the electric
•
shock hazard, unplug
the battery charger
from the mains before
cleaning the charger.
Do not expose the bat-
•
tery to strong sunlight
over long periods and
do not leave it on a
heater. Heat damages the
battery and there is a risk of
explosion.
Allow a hot battery to
•
cool before charging.
Do not open up the bat-
•
tery and avoid mechan-
ical damage to the bat-
tery. Risk of short circuit and
fumes may be emitted that ir-
ritate the respiratory tract. En-
sure fresh air and seek medic-
al assistance.
Do not use non-re-
•
chargeable batteries!
The device could be dam-
aged.
Only use accessor-
•
ies recommended by
PARKSIDE. Unsuitable ac-
cessories may cause electric
shock or fire.
Safe operation of battery
chargers
Children should be supervised
•
to ensure that they do not
play with the device.
Use this charger only
•
for charging batteries of
the series X 20 V TEAM.
Charging other batteries may
cause injury and risk of fire or
explosion.
Before each use, check
•
the charger, cable and
plug and have them re-
paired by qualified pro-
fessionals and only with
original parts. Do not
use a defective char-
ger and do not open it
up yourself. This ensures
that the safety of the device is
maintained.
GB
21