Panasonic Panafax UF-885 User Manual page 186

Glossary
Relay Transmission
Relay Transmission Report
RESOLUTION
Selective reception
Sleep Mode
Station name
Stored documents
Sub-address
Sub-address Password
Substitute memory reception Your machine's ability to store an incoming document into its memory,
Transmission reservation
Transmission password
User parameter
Verification stamp
View Mode - File List
View Mode - Journal
184
Sending a document to a relay station, which in turn, sends the document
to the end receiving station.
A report that contains information regarding the last document
transmission to a relay station.
Relates to the number of dots scanned or printed per certain square. The
quality of the image increases as the number of dots per certain square
increases.
A function that can be set so that your unit will receive from only those
machines programmed into your dialer.
The lowest power state that the machine enters after the specified time
without actually turning off. (Sleep Mode is not available when the optional
Parallel Port Interface Kit, PDL Printer Driver Kit or G3 Communication Port
Kit is installed)
Alphanumeric ID which can be programmed for each One-Touch dialing
and Abbreviated dialing number.
Documents that have been scanned and now are stored in your machine's
memory.
ITU-T recommendation for further routing, forwarding or relaying of
incoming faxes.
ITU-T recommendation for additional security that corresponds to the Sub-
address.
when it runs out of recording paper or toner.
The ability to preset a telephone number so that you may reserve a
transmission while your unit is performing another function.
A 4-digit password that is checked when a document is transmitted.
Programmed parameters that provide information to other stations.
Examples are logo, character ID, date and time.
A user selectable transmission verification stamp can be placed on
scanned documents that are successfully transmitted or stored in memory.
Allows you to view the brief contents of the memory files through the LCD
display without having to print the Memory File List.
Allows you to view the brief contents of the journal through the LCD display
without having to print the journal.