Panasonic Panafax UF-885 User Manual page 183

Cover Sheet
DDD
(Direct Distance Dialing)
Deferred polling
Deferred transmission
Department Code
Direct Dialing
Directory Search Dialing
Directory Sheet
DTMF(Dual Tone Multi-
Frequency)
ECM (Error Correction Mode) The ability to correct transmission errors as detected during the
Energy-Saver Mode
End receiving station
FAX Forward
FAX Parameter List
F.C.C.
File
File Transmission
Fixed print reduction
FUNCTION
G3 mode (Group 3)
A Fax Cover Sheet can be attached to your transmit document(s) that
shows the recipient's name, originator's name and number of pages
attached.
A telephone service that allows unassisted dialing, no operator assistance
is required.
The ability to retrieve documents from other stations at a later time.
The ability to send documents to other stations at a later time.
This operation require the user to input a preset 4-digit Department Code
before transmission. The Department Name of selected Department Code
is printed on the Header of each page sent, Cover Sheet, COMM.
Journal and Individual Transmission Journal.
The method of dialing where you enter the entire telephone number
through the keypad.
Allows you to dial a full telephone number by searching the station's name
entered in the One-Touch keys or Abbreviated dialing numbers.
The list that contains the station names that are programmed into your unit.
Dialing method that sends a different set of frequencies for each digit of the
telephone keypad. Commonly refers to touch tone dialing.
transmitting phone call.
Saves energy by consuming less power than when in standby mode by
turning off the fuser unit after the specified time.
In a relay network, the final station designated to receive the document.
The ability to forward all incoming faxes to the registered station.
The list that contains the home FAX parameters settings that you have
programmed into your machine.
Federal Communications Commission. The U.S. Government organization
that regulates communications originating or terminating in the United
States.
A task that has been stored into the memory of your unit. Examples are
deferred transactions.
A feature that allows you to store a perpetual File (until it is erased) in the
memory that can be sent to a single or multiple stations repeatedly.
The method that allows you to determine one reduction rate, such as 75%,
for all incoming documents.
The control panel key that will be utilized to begin an operation or
configuration of a feature.
Refers to the standards and transmission capabilities of the current
generation of facsimile machines.
Glossary
9
181