Panasonic Panafax UF-885 User Manual page 15

Used to set Normal, Lighter, or Darker.
CONTRAST
(See page 41)
Used to set Standard, Fine, Super-Fine.
RESOLUTION
(See page 41)
HALFTONE Provides OFF, QUALITY or FAST settings for
halftone documents. (See page 42)
Used to select either memory or direct
MEMORY
communication.
(See page 44 to 54)
Used to enter a pause when recording or
PAUSE
REDIAL
dialing a telephone number, or to redial the
last dialed number. (See page 59)
Used to start Abbreviated Dialing. (See page
ABBR
48 and 53)
Used to separate the Sub-address from the
SUB-ADDR
FLASH
telephone number when dialing, or to access
some features of your PBX.
Used to start or select the function and
FUNCTION
sub-functions.
These functions are explained in detail on
page 10.
Used for Manual Number Dialing,
ABC DEF
1 2 3
recording phone numbers, and selecting
GHI JKL MNO
functions.
4 5 6
PRS TUV WXY
7 8 9
TONE OPER
0
Used to temporarily change the Dialing
TONE
Mode to Tone when Pulse mode is set.
Control Panel
Used for the following:
+
• Adjust the monitor and ringer volume.
(See page 23)
VOLUME
• Move the cursor while entering numbers
and characters.
-
• Search the station name for Directory
Search Dialing.
• Confirm the entered station for multi-station
communication.
• Select functions.
• Confirm the current communication modes
(e.g. Page number, ID, Dialed Telephone
number, File number) when the unit is ON
LINE.
Used to turn the verification stamp ON or
STAMP
OFF. (See page 42)
Used to search for a station name.
DIRECTRY
SEARCH
(See page 49 and 54)
Used to erase the previously entered input.
CLEAR
Used to set operations.
SET
Used to select the communication port.
LINE
Available for UF-895 only if the Optional G3
SELECT
Communication Port Kit has been installed.
(See page 173)
Used to start On-Hook Dialing. (See page 56)
MONITOR
Used to cancel operations. When it is
STOP
pressed, the machine will return to standby.
Used to make copies.
COPY
(See page 64)
Used to start operations.
START
1
13