Fluke SMFT1000/PRO User Manual page 8

SMFT-1000
Users Manual
Insulation Resistance R
Display Range
0.00 MΩ to 99.99 MΩ
100.0 MΩ to 199.9 MΩ
200 MΩ to 999 MΩ
Test voltage @ no load
Testing current
Live circuit detection
Maximum capacitive
load
The number of insulation tests with a new set of batteries is >900 at 1000V / 1 MΩ.
Blocking Diode Check (V
Display Range
0.00 V dc to 6.00 V dc
Live circuit detection
Surge Protection Devices (SPD)
Display Range
0 V dc to 1000 V dc
Live circuit detection
True-rms AC V, DC V, AC A, DC A
The PV Analyzer measures both ac and dc signal components (voltage or current) and displays AC+DC
(rms) value combined. The display of ac or dc unit is dependent on if there is zero crossing of the signal.
AC/DC Voltage Measurement with 4 mm Test Sockets
Display Range
0.0 V ac to 99.9 V ac
100 V ac to 700 V ac
0.0 V dc to 99.9 V dc
100 V dc to 1000 V dc
Detection ac/dc
Positive / negative polarity check
4
INS
Measurement Range
0.20 MΩ to 99.99 MΩ
100.0 MΩ to 199.9 MΩ
200 MΩ to 999 MΩ
50 V / 100 V / 250 V up to 199.9 MΩ
500 V / 1000 V up to 999 MΩ
Min. 1 mA (@ 250 kΩ / 500 kΩ / 1 MΩ)
Max. 1.5 mA (short circuit)
Inhibits test if terminal voltage >15 V ac (typical) detected prior to initiation of
test.
Operable with up to 2 µF at 1MΩ
)
BD
Measurement Range
0.50 V dc to 6.00 V dc
Inhibits test if terminal voltage >50 V ac/dc (typical) detected prior to initiation
of test.
Measurement Range
50 V dc to 1000 V dc
Inhibits test if terminal voltage >50 V ac/dc (typical) detected prior to initiation
of test.
Measurement Range
5.0 V ac to 99.9 V ac
100 V ac to 700 V ac
5.0 V dc to 99.9 V dc
100 V dc to 1000 V dc
Yes (Automatic)
Yes
Resolution
0.01 MΩ
0.1 MΩ
1 MΩ
1 V
Note
Resolution
0.01 V dc
Resolution
1 V dc
Resolution
0.1 V
1 V
0.1 V
1 V
Accuracy
± (5 % + 5 Digit)
± (10 % + 5 Digit)
± (20 % + 5 Digit)
0 % to + 25 %
Accuracy
± (5 % + 10 Digit)
Accuracy
± (10 % + 5 Digit)
Accuracy
(DC, AC 50 Hz/60 Hz)
± (2.5 % + 2 Digit)