Panasonic KX-FP155 Operating Instructions Manual page 35

Sending the same document to pre-programmed parties
1 Insert the document FACE DOWN.
If necessary, press
to select the desired resolution (p. 28).
2 Press .
Display:
3 Press or
displayed.
4 Press SET .
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each station, calling
each number sequentially.
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report (see below).
Note:
If you select the "FINE", "SUPER FINE" or "PHOTO"
resolution, the number of pages that the unit can
transmit will decrease.
If the document exceeds the memory capacity (p. 85),
sending will be canceled.
If one of the stations is busy or does not answer, the
station will be skipped. All skipped stations will be
redialed up to 2 times after all of the other stations
have been called.
Sample of a broadcast sending report
BROADCAST REPORT
NO. OTHER FACSIMILE
01 Mike
02 Peter
03 Sam
04 Kim
or repeatedly
DIRECTORY[+ -]
<MAILBOX>
until the following is
<BROADCAST>
SEND:PRESS SET
START TIME USAGE TIME
Jan.10 09:31AM 01'10
Jan.10 09:33AM 01'08
Jan.10 09:34AM 01'09
Jan.10 09:35AM 01'10
TOTAL 004'37
Sending Faxes
Display
H
To cancel the broadcast setting
1. Press STOP
following message.
Display:
The display will show the following.
2. Press
SET
YOUR LOGO :
YOUR FAX NO. :
PAGES
02
02
02
02
008
STOP
SET
while the unit displays the
BROADCASTING
SEND CANCELED?
YES:SET/NO:STOP
.
Jan. 10 2001 09:36AM
RESULT
OK
OK
OK
OK
35