Projector Covers - Barco UDM Installation Manual

Projector covers

8.1 Cover locks ..................................................................................................................................88
8.2 Removal of the front, side and rear covers ......................................................................................89
8.3 Removal of top cover ....................................................................................................................90
8.4 Installing the projector covers ........................................................................................................91
About this chapter
Most maintenance and service procedures demand removing one or more of the projector covers to gain
access to the parts to maintain or to service.
The procedures in this chapter describe, with detailed step by step actions and illustrations, how to remove or
install the projector covers.
WARNING: Switch off the projector and disconnect the power cord from the projector and wait a few
minutes (to discharge the capacitors) prior to start with this procedure, unless otherwise specified in
the procedure.
WARNING: All procedures in this chapter must be performed by "Barco authorized qualified service
personnel".
8
R5911438 /09 UDM 87