Table of Contents
Advertisement
Pulse SFP input use cases
7.3 Use case 3: Neutrik OpticalCon Quad + SFP+
transceiver + internal fiber
Neutrik OpticalCon Quad + SFP+ transceiver + internal fiber
Image 7–3
1
SFP input board
2
Neutrik OpitcalCon Quad
3
Internal fiber cable
Barco delivers only the SFP input and SFP+ fiber transceivers. The customer has to buy the SFP+
transceiver and the optional breakout adapter or the fiber integrated cable.
How to configure the SFP input
1.
Remove one plate covering the access to a Neutrik connector location.
2.
Mount the Neutrik OpticalCon Quad connector.
3.
Remove the plate covering the access to the SFP cage and insert the SFP+ transceivers.
4.
Re-install the cover plate.
5.
Mount the optical internal cables between the Neutrik connector and the SFP+ transceivers.
6.
Install the SFP input in its slot of the Input & Communication module. See procedure
input board", page
84
R5911438 /09
UDM
1
55.
2
3
4
SFP+ fiber transceiver
5
Advanced quad cable
5
4
"Installation of an
Advertisement
Table of Contents
