Broadcast transmission
This feature is useful for sending the same document to more than one party (up to 20 entries). First
program the entries, then see page 49 for transmission.
L The broadcast function utilizes station 1. The one-touch dial function will be canceled.
L The broadcast key can accept one-touch dial and navigator entries.
Programming entries into the
broadcast memory
{MENU}
{+} {-}
1
Press { { { { MENU} } } } repeatedly until the
following is displayed.
2
Press { { { { BROADCAST} } } } .
3
Press { { { { + + + + } } } } or { { { { - - - - } } } } until the following is
displayed.
4
Press { { { { SET} } } } .
{BROADCAST}
Station keys
{LOWER}
{SET}
{STOP}
DIRECTORY SET
PRESS STATION OR
b
DIRECTORY SET
PRESS NAVI.
STATION 1
DIAL MODE
[±]
STATION 1
BROADCAST
[±]
DIR=
[00]
NAVI.[+ -] & SET
Sending Faxes
5
Program entries.
Using stations 2 and 3:
Press the desired station key.
Example:
Using stations 4–6:
Press { { { { LOWER} } } } , then press the desired
station key.
Using navigator directory:
Press { { { { + + + + } } } } or { { { { - - - - } } } } until the desired entry is
displayed and press { { { { SET} } } } .
6
Press { { { { SET} } } } after programming all of the
desired entries.
7
Press { { { { STOP} } } } to exit the program.
Note:
L If you program the wrong entry, press
{ { { { STOP} } } } after step 5 to erase the entry.
L Confirm the stored entries by printing a
broadcast programming list (page 79).
DIR=ANN
[01]
STORE:PRESS SET
REGISTERED
u
DIRECTORY SET
PRESS STATION OR
b
DIRECTORY SET
PRESS NAVI.
47