Panasonic KX-FB421 Operating Instructions Manual page 81

Updating the rate table
(downloading the rate table)
If you register through openLCR web site or
move to another area, you have to download the
rate table manually.
FLASH/LIGHT
{<} {>}
{STOP}
1
Press { { { { CALLER IQ} } } } .
2
Press { { { { < < < < } } } } or { { { { > > > > } } } } until the following is
displayed or press { { { { 2} } } } .
3
Press { { { { SET} } } } .
L The fax machine will automatically
receive the rate table.
For assistance, please call openLCR: 1-866-openLCR (1-866-673-6527)
{SET}
CALLER IQ
PRESS NAVI.[( )]
NEW RATE TABLE
PRESS SET
DOWNLOAD IN
PROCESS.
Caller IQ Feature
During download
L The CALLER IQ indicator will flash and the
display will show the following.
L During downloading, you cannot do other
operations such as making/answering a call
or sending/receiving a document.
L Depending on where you live, the call for
downloading may be a long distance call and
will take about 1-2 minutes. You will be
charged for the cost of the call.
L When the download is completed, the
CALLER IQ indicator will stop flashing but will
remain lit up and the display will show the
following:
L If the display shows the following, the unit
was unable to download from openLCR.
Try downloading manually again.
L If the display shows the following, the Caller
IQ feature is set to off.
Set the Caller IQ feature to on by referring to
page 80.
Automatic download
The fax machine will automatically download the
latest rate table when:
– the rate table in the fax machine reaches
expiry date; usually between 60-90 days after
last update,
– the fax machine is being polled by openLCR
service center, or
– you set the Caller IQ feature from OFF to ON
(page 80).
To stop downloading
1. Press { { { { STOP} } } } .
2. Press { { { { SET} } } } .
DOWNLOAD IN
PROCESS.
DOWNLOAD OK!
DOWNLOAD ERROR.
TRY AGAIN.
SET LCR TO ON
CANCEL DOWNLOAD?
YES:SET/NO:STOP
81