Cabling - DW DWC-VSTB04Bi User Manual

5. Mount the
included screws and anchors.
6. Adjust the camera's pan and tilt by
loosening the lock screw at the base of
the camera. Tighten the screw once the
adjustment is complete.
7. Remove the protective film from the dome. Softly wipe the dome with lens tissue
or a microfiber cloth with ethanol to remove any dust or smudges left from the
installation process.

2.3 Cabling

Use the diagram below to connect power, network and audio to the camera.
camera using the
3