Advertisement
Wear an ESD wrist strap and make sure it makes good skin contact and is reliably
1
grounded.
Unpack the fan tray.
2
Orient the fan tray with the upside up and align the fan tray with the fan tray slot.
3
Holding the upper fan tray handle with one hand and the lower fan tray handle with the
4
other hand, insert the fan tray into the slot. Keep the fan tray as straight as possible.
Fasten the captive screws on the fan tray.
5
2
1
Removing a fan tray
When you remove a fan tray, do not touch the rotating fans to avoid getting injured.
!
Before you replace a switching fabric module, remove the fan tray.
Prepare an anti-static mat.
1
Wear an ESD wrist strap and make sure it makes good skin contact and is reliably
2
grounded.
Loosen the captive screws on the fan tray.
3
Holding the upper fan tray handle with one hand and the lower fan tray handle with
4
the other hand, pull the fan tray outwards slowly until the fan tray is disengaged from
the chassis. Remove the fan tray after the fans stop rotating.
Place the fan tray on the anti-static mat.
5
1
2
Documentation
To find related documents, browse to the Manuals page of the HP Business
Support Center website:
http://www.hp.com/support/manuals
5998-7601
Advertisement
