Advertisement
PRECAUTIONS
IV.
Operating
IV.
Operating
4.1. Precautions
WHEN PUTTING THE CLEANER INTO THE POOL, THE AIR INSIDE THE CLEANER
a. When putting the cleaner into the pool, the air inside the cleaner should be discharged as follow:
4.1. Precautions
SHOULD BE DISCHARGED AS FOLLOW:
① Hold the cleaner and submerge it vertically for 5-6 seconds until no bubbles come out (Fig. 1).
a. When putting the cleaner into the pool, the air inside the cleaner should be discharged as follow:
1. Hold the cleaner and submerge it vertically for 5-6 seconds until no bubbles come out
② Press the switch button to power on and rotate the cleaner 90 degrees.
(Fig. 1).
① Hold the cleaner and submerge it vertically for 5-6 seconds until no bubbles come out (Fig. 1).
③ Submerge it horizontally into the pool floor until a large number of bubbles are discharged from
2. Press the switch button to power on and rotate the cleaner 90 degrees.
② Press the switch button to power on and rotate the cleaner 90 degrees.
the nozzle (Fig. 2).
3. Submerge it horizontally into the pool floor until a large number of bubbles are
③ Submerge it horizontally into the pool floor until a large number of bubbles are discharged from
discharged from the nozzle (Fig. 2).
the nozzle (Fig. 2).
b. Put into or lift out of the pool with the cleaner bottom towards the wall to avoid any possible
PUT INTO OR LIFT OUT OF THE POOL WITH THE CLEANER BOTTOM TOWARDS THE
scratches to the pool.
WALL TO AVOID ANY POSSIBLE SCRATCHES TO THE POOL.
b. Put into or lift out of the pool with the cleaner bottom towards the wall to avoid any possible
scratches to the pool.
C. Please ensure that the top cover of the cleaner is tightly assembled to its chassis.
OPERATING INSTRUCTION
instruction
instruction
Fig. 1
Fig. 1
Fig. 2
22 22
Fig. 2
Advertisement
Chapters
