Page 6
3. This equipment must only be used by trained mobifor™ anchor point must be secured. It must be and skilled personnel, or under the supervision of entered into a usable technical file by the installer.
“Belay lanyard": Connecting element between an anchor point and a system to be secured. The mobifor™ fall arrest anchor point can be used on PVC or bonded bitumen sealing coats in compliance "Shock absorber": Device for absorbing energy and with directive 1907/2006/CE and standard ISO11014-1 limiting the person's fall load.
• Anchor point (fig. 1, rep. 5). • Absorber rotation axis. (Fig. 1, rep. 6). • Anchor point identification label (fig. 1, rep. 7). Standard delivery of a mobifor™ anchor point consists of the following components: A plastic bag containing: •...
(Fig. 2) and the edge of the terrace is 2.5 m or more (Fig. 4). The terrace roof on which the mobifor™ anchor point is installed must be resistant to support the additional For the calculation of the air draft H, the maximum weight due to the anchor point, i.e.
7.3.1.1. Installation of the galvanised steel central structure (Fig. 1, rep. 3): 1. The installation of the mobifor™ anchor point must This structure is equipped with 4 Sp surface mounting be performed by a trained and competent person. pads (Fig. 3) in order to avoid any risk of deterioration 2.
Page 11
→ First arm equipped with its 6 blocks (Fig. 5, rep. 11). 8. Use 2. Do the same for the other 3 arms. → mobifor™ anchor point installed and ready for use Anyone who is to use the mobifor™ anchor should (Fig. 5, rep. 12).
The person in charge of the use of the mobifor™ anchor point shall provide a rescue procedure for the operator in the event of a fall and for any other emergencies, 10.
Page 13
Check that the part has not (Fig. 1, rep. 3) been modified 19. to use the mobifor™ anchor point if one or more 25 kg blocks are not in place on the arms and properly Check the absence of positioned, deformation 20.
14. Conformity of the equipment disposal, dismantling to separate components should be achieved by a duly trained person. TRACTEL SAS RD 619 company - Saint-Hilaire-sous- Romilly - F-10102 Romilly-sur-Seine France hereby 17. Marking declares that the safety equipment described in this manual, The marking on each product indicates ( Fig.
Need help?
Do you have a question about the mobifor and is the answer not in the manual?
Questions and answers