Download Print this page

Tractel skysafe MP 03 Assembly And Operating Manual

Modular suspended platforms & knockdown suspended platforms

Advertisement

Quick Links

skysafe
®
Modular Suspended Platforms
& Knockdown Suspended Platforms
assembly and operating manual
for
ONTARIO, CANADA ONLY
Classified by Underwriters Laboratories Inc.®
As to Load Capacity Only
400S
ISO Certified Company
ISO 9001
ISO 14001 and
OHSAS 18001
model MP03 and KD01
1
© 2016 Tractel
Inc. All rights reserved.
®

Advertisement

loading
Need help?

Need help?

Do you have a question about the skysafe MP 03 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Tractel skysafe MP 03

  • Page 1 ONTARIO, CANADA ONLY Classified by Underwriters Laboratories Inc.® As to Load Capacity Only 400S ISO Certified Company ISO 9001 ISO 14001 and OHSAS 18001 model MP03 and KD01 © 2016 Tractel Inc. All rights reserved. ®...
  • Page 2 Suspension Points and Support Equipment Platform Wire Ropes Hoists USE AND OPERATION OF THE PLATFORM INFORMATION FOR MAINTENANCE MODULAR SUSPENDED PLATFORM COMPONENTS Exploded View – Primary Components Component and Spare Part Product Codes Labels and Markings © 2016 Tractel Inc. All rights reserved. ®...
  • Page 3: Safety Advice

    1st. edition (Ontario only) Dec., 2016 ® Griphoist Division 11020 Mirabeau Copyright Anjou, Quebec H1J 2S3 The manufacturer holds the copyright of this Toll Free 1-800-561-3229 installation and maintenance manual. Tel: (514) 493-3332 Fax: (514) 493-3342 © 2016 Tractel Inc. All rights reserved. ®...
  • Page 4 12. All wire rope terminations of the suspension line required to 2017. be tested prior to being used for the first time. The 5. Tractel is a certified ISO 9001 quality management employer must keep the testing record available to an company. The platform modular sections and stirrups are inspector on request at project site fabricated under our quality program.
  • Page 5: General Warning

    11. Maintenance may only be carried out by personnel 18. Every suspended job must be placed under the control of authorized by Tractel. A signed a dated inspection record a person having the required competence and authority should be maintained.
  • Page 6 Tractel engineering scaffold installation. Whenever calculations and department specific rigging and handling are involved, the operator 22.
  • Page 7: Transport And Handling

    - In case of obstruction during the use of the platform impact. the hoist installation must be checked before reusing - No modification of any components of the platform equipment must be done. © 2016 Tractel Inc. All rights reserved. ®...
  • Page 8 TECHNICAL SPECIFICATIONS FOR PLATFORMS MODULAR COMBINATIONS FOR VARIOUS PLATFORM LENGTHS FOR APPLICATION PURPOSES. 3.1.1 Platform with End Stirrups © 2016 Tractel Inc. All rights reserved. ®...
  • Page 9 TECHNICAL SPECIFICATIONS FOR PLATFORMS MODULAR COMBINATIONS FOR VARIOUS PLATFORM LENGTHS FOR APPLICATION PURPOSES. 3.1.2 Platform with Intermediate Stirrups © 2016 Tractel Inc. All rights reserved. ®...
  • Page 10 (4M) (247) (450) (239) (450) (262) (450) (254) (450) not listed in this table must be consulted with Tractel for their project specific requirements. ↑2-3↑ ↑2+3↑ 16’6” 16’ 0” 1000 1000 16’ 2” 1000 1000 3) Platforms longer than 12M (39.5 feet) meeting ↑1-3-1↑...
  • Page 11 E↑3-3-2-3↑E 35’ 4” E↑3+3+2+3↑E 35’ 10” (11M) (422) (450) (445) (450) (471) (340) (494) (340) this table must be consulted with Tractel for their project specific 39’ 6” 1000 1018 1081 1131 E↑3-3-3-3↑E 38’ 8” E↑3+3+3+3↑E 39’ 2” requirements. (12M) (440) (450)
  • Page 12 Any other work cage stirrup platform configurations ↑ ↑ (2M) 6’6” (192) (227) 6’6” (194) (227) not listed in this table must be consulted with Tractel for their project specific requirements. ┴ ┴ Legend: ↑ Stirrup 2 2M Modular E End Frame 1 1M Modular ┴...
  • Page 13 - In case of obstruction during the use of the platform the hoist installation must be checked before reusing - No modification of any components of the platform equipment must be done. © 2016 Tractel Inc. All rights reserved. ®...
  • Page 14 Intermediate Stirruips Workcage Stirruips © 2016 Tractel Inc. All rights reserved. ®...
  • Page 15 Gravity Lock Pin to be vertical - as shown U-Frame Adapter model PMR0041C align holes and secure ball lock pin Cross section side U-frame Connector section PMR0041C deck Gravity Lock Pin PIN0002B Knockdown Component Assembly Details © 2016 Tractel Inc. All rights reserved. ®...
  • Page 16 Use only the 5/8 inch diameter gravity lock pins and connectors supplied by Tractel. Make sure that the pins are not worn, bent or otherwise damaged. Never substitute alternative pins, bolts or connectors.
  • Page 17 Do not hammer or force the pins into place. b. Use only the 5/8 inch diameter gravity lock pins and connectors supplied by Tractel. Make sure that the pins are not worn, bent or otherwise damaged. Never substitute alternative pins or bolts.
  • Page 18 Do not hammer or force the pins into place. b. Use only the 5/8 inch diameter gravity lock pins and connectors supplied by Tractel. Make sure that the pins are not worn, bent or otherwise damaged. Never substitute alternative pins or bolts.
  • Page 19 - No modification of any components of the platform PMR0400D (ISS01) MODSHC equipment must be done. Fig. 22 Fig. 23 PMR0260D (IS02) MODSFC © 2016 Tractel Inc. All rights reserved. ® PMR0400D (ISS01) PMR0260D (IS02)
  • Page 20 Raise the top rail and pin it in place to regulation height, either 36 inches (910mm) or 42 inches (1100mm) high. h. Do not cross wire ropes. Fig. 24 Fig. 24a Fig. 25 Fig. 25a PMR0260D (IS02) MODSHC PMR0400D (ISS01) MODSFC © 2016 Tractel Inc. All rights reserved. ®...
  • Page 21 (6) and travels down into the Blocstop (7). From the Blocstop it runs through the top of the hoisting mechanism and out through the bottom. PMR0720D (WCS02) MODSWC Fig. 26 Fig. 26a © 2016 Tractel Inc. All rights reserved. ®...
  • Page 22 Blocstop (7). From the Blocstop it runs through the top of the hoisting mechanism and out through the bottom. Repeat using the left-hand side if using a two rope system. PMR0720D (WCS02) MODSWC Fig. 27 Fig. 27a © 2016 Tractel Inc. All rights reserved. ®...
  • Page 23 Total amount and location of counterweight on an individual basis and may involve different must be calculated by a professionally competent materials or methods. person according to applicable regulations and checked before each use, at least daily. © 2016 Tractel Inc. All rights reserved. ®...
  • Page 24 Check if the cable size of the power cord is sufficient. d. Check that the hoists, blocstop and emergency switches function properly. e. Check that power cord has strain relief to avoid damage. © 2016 Tractel Inc. All rights reserved. ®...
  • Page 25 - Inspection is to be carried out by competent person before WARNING: each rigging of the platform. - Inspection by persons authorized by Tractel, is to be carried out once every six months or every 200 Ensure that the distance (a) between the suspension hours.
  • Page 26 90˚ Corner Section 3’-0” (1 m) Modular 60˚Corner Section PMR0004D (AS15) PMR0005D (AS30) PMR0006D (AS45) PMR0007D (AS60) PMR0008D (AS90) Platform Section PMR1600D (MP03) Note: require consultation and engineered drawings for your specific use. © 2016 Tractel Inc. All rights reserved. ®...
  • Page 27 MODSWC over 12” (305 mm). 15˚ Corner Section 30˚ Corner Section 45˚ Corner Section 90˚ Corner Section 21” (1/2 m) Modular 60˚Corner Section MODC15 MODC30 MODC45 MODC60 MODC90 Platform Section MOD05 Note: © 2016 Tractel Inc. All rights reserved. ®...
  • Page 28 8.2 Component and Spare Part Product Codes COMPONENTS Tractel Code No. Description Lbs. (kg) PMR1800D (MP03) SKYSAFE - 3m Modular Stage Section (60) PMR1700D (MP03) SKYSAFE - 2m Modular Stage Section (42) PMR1600D (MP03) SKYSAFE - 1m Modular Stage Section...
  • Page 29: Spare Parts

    SPARE PARTS Tractel Code No. Description Lbs. (kg) PIN0002B SKYSAFE – Platform Section Connecting Pin for H-Bracket (0.2) PMR0025B SKYSAFE – Platform Section Connecting H-Bracket (STCONO1) (1.4) FY101230 SKYSAFE – Handrail Connecting Pin (0.1) FY105315 SKYSAFE - Ball Lock Pin for Knockdown Side/Deck Connection (0.2)
  • Page 30 8.3 Labels and Markings Part #SPLB156 Part #SPLB157 Fig.31 Fig.34 Fig.33 © 2016 Tractel Inc. All rights reserved. ®...
  • Page 31 Part #SPLB158 Fig.35 © 2016 Tractel Inc. All rights reserved. ®...
  • Page 32 INTERMEDIATE SHORT STIRRUP UNIVERSAL END STIRRUP ISS 01 ES 02 PART # SPLB018A PART # SPLB021A FIG. 40 FIG. 41 STAGEMOD END STIRRUP END FRAME ES 01 EF 01 PART# SPLB057A PART # SPLB016A © 2016 Tractel Inc. All rights reserved. ®...
  • Page 33 ANGLE SECTION 90° AS 90 Note: All the corner sections and the 1/2m platform are available for project use. These items require consultation with your equipment provider for your specific use. PART #SPLB024A © 2016 Tractel Inc. All rights reserved. ®...
  • Page 34 KD 01 PART # SPLB048A PART # SPLB015A CLASSIFIED BY FIG. 49 UNDERWRITERS LABORATORIES INC © AS TO LOAD CAPACITY 400S PART # SPLB027B FIG. 51 FIG. 50 PART # SPLB130A Part# SPLB111A © 2016 Tractel Inc. All rights reserved. ®...
  • Page 35 METAL SCAFFOLDING DEVICES USE EXTREME CARE AROUND SUCH MATERIALS AND FOLLOW MANUFACTURER INSTRUCTIONS PART #SPLB013A FIG. 53 HANDRAIL MUST BE PINNED IN PROPER RAISED POSITION DURING USE PART # A27150 FIG. 54 PART #SPLB039A © 2016 Tractel Inc. All rights reserved. ®...
  • Page 36: General Instructions

    Danger! - To avoid contact and shock hazards, regulations. Thier use recommended in all cases. platforms, wire ropes and tools should not be used in the vicinity of energized power lines or electrical lines. FIG. 56 PART # SPLB036A © 2016 Tractel Inc. All rights reserved. ®...
  • Page 37 9. The hoisting attachment must be secured to the 4. Insert pins from inside of platform. Do not hammer stirrup according to the hoist manufacturer’s pins into place or use undue force. instructions. © 2016 Tractel Inc. All rights reserved. ®...
  • Page 38 8.3 Label Placement Chart General Instructions, Assembly Instructions, Load Label, Product Identification Tag, Configuration Intermediate Stirrup and Configuration End Stirrup Labels. FIG. 33-35, 47 or 48, 49, 52 to 58. © 2016 Tractel Inc. All rights reserved. ®...
  • Page 39 NOTES ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ © 2016 Tractel Inc. All rights reserved. ®...
  • Page 40 Toll Free 1-800-561-3229 Tel: (514) 493-3332 Fax: (514) 493-3342 As we are dedicated to continuous improvement of our products, the TRACTEL ® reserves the right to modify the specifications of the equipment described in this manual. As a result, illustrations may not represent exactly the product you receive: components and/or design may differ.