Introduction; Intended Use Of The Device; Acts, Regulations And Standards; Type Of The Device - MP DRY CABINET II User Manual

User´s manual
MP DRY CABINET II
1

Introduction

The purpose of the User´s manual is to inform the user of the properties, use, correct assembly procedure and
maintenance of MP DRY CABINET II. The User´s manual contain description of construction, principle of operation,
technical parameters of the device.
1.1

Intended Use of the Device

Drying cabinet MP DRY CABINET II is intended for drying and storage of PCB´s and electronic components at very
low relative humidity without having to use of vacuum packaging.
1.2

Acts, Regulations and Standards

The acts, regulations and standards mentioned below are in force in the European Union. In other countries, the local
legislation dealing with the given issues is valid. The device complies with directives and government regulations and
harmonized technical standards listed in the table.
Name
On safety of low voltage electric devices
Low voltage electrical installations - revision
Protection against electric shock
Revision of electric devices
Protection class by coverage
1.3

Type of the device

MP DRY CABINET I. 1x door
MP DRY CABINET II. 2 x doors
MP DRY CABINET IV. 4 x doors
Designation
Directive 2006/95/EC (GR No. 17/2003 Coll.)
EN 33 2000-6
EN 33 2000-4-41 ed.2
EN 33 1500
EN 60529/1993
page 3/22