Table of Contents
Advertisement
User´s manual
MP DRY CABINET II
5
Preparation for Use
•
Unpack the device and clean it from the leftovers of the transport material.
•
Check the supply for completeness against the packing bill.
•
Check the intactness of all the parts supplied (mainly the glass ones).
•
Check the control unit, display, indicator lights and connectors for mechanical damage.
!
Should you detect any shortcomings during the initial preparation, provide for their repair before the device is
connected to the mains.
5.1
Storage
•
Store MP DRY CABINET device in a place with temperatures from 0 to 45 °C and relative humidity up to 70%.
•
Avoid contact with water, chemical substances or rain.
•
Protect against dust when stored.
5.2
Transport and Assembly
!
When handling the device, observe the safety regulations applying to this activity!
!
Be extra cautious when handling the heavy device. Its weight is 90, 180, 320 kg according the type!
!
IT IS PROHIBITED to expose the device to mechanical shocks and hits.
•
The device is transported assembled and ready to use.
•
When handling the device, never put your hands or other parts of the body under those parts of the device which are
not perfectly mounted or which are moving.
•
Transport the device in a locked position on a common van or truck as means of transportation.
•
During transport, always lock the wheels with the lock mechanism and wedge them with a common wedge for both
front and both rear wheels.
•
Locate the device to the place of operation to allow easy access from all the sides, 150 mm from the wall, as a
minimum.
•
On a place intended for use, secure stability and grounding of device with 4 adjustable legs so that all 4 are firmly
connected to the floor.
!
Device while operating cannot stand only on the transport wheels, but on adjustable legs only.
SECURING STABILITY OF THE DEVICE
Travelling wheels
Locking and grounding legs
page 10/22
Advertisement
Table of Contents
