Table of Contents
Advertisement
Warning: The charger may get hot when air temperatures rise above
86 degrees F (30 degrees C). Under these temperature conditions,
keep the lid to the equipment case open during charging activities to
allow adequate air circulation.
Safety Information
The charger should be used only with the supplied cables. It also has been
designed for use only with the equipment supplied; therefore, do not use it to
charge any other type of equipment. Do not use the charger in damp or wet
conditions.
External Charger
The battery charger must be grounded. The mains lead has a standard IEC
connector. If damage occurs to the cable or integrated plugs, replace the cord
set or consult a qualified electrician.
Replace fuses only with fuses of the correct size and rating.
Internal Charger
The universal "wall-cube" plug-in mains power supply provided by ADS is
double-insulated and does not require grounding. Use care when fitting the
input adapter to ensure safe operation of the supply.
ADS Eureka2R Leak Noise Correlator User Manual
33
Advertisement
Table of Contents
