Choosing A Location For A Transmitter - Primayer ADS Eureka2R User Manual

ADS Eureka2R Leak Noise Correlator User Manual
A steady green LED means the transmitter is fully recharged.
When other indicator LEDs are flashing, a battery fault is occurring. The most
likely cause would be an overheated battery. Recharging the transmitter in full
sunlight is one way that a battery can become overheated. When this occurs,
disconnect the transmitter and allow it to cool. If the fault indication persists
after the transmitter is cool, return the unit to ADS for service.

Choosing a Location for a Transmitter

Locate the transmitter aboveground. Whenever possible, obtain a clear line-
of-sight to the correlator.
Do not conceal the transmitter by placing it close to parked vehicles, metal
fencing, or other metallic objects.
18