Download Print this page

Keurig K-Slim + ICED Use & Care Manual page 2

Hide thumbs Also See for K-Slim + ICED:

Advertisement

Before You Brew
1
Plug & Place
Remove packing tape from brewer.
Plug into a grounded outlet. Place
mug on drip tray.
NOTE: The brewer will automatically turn off after
5 minutes of inactivity. Or, you can hold down the
BREW OVER ICE button to turn the brewer off
at any time.
3
Lift & Lower
Lift and lower the handle. Do not
insert a K-Cup® pod. The brewer will
power on automatically.
Brew Your First Cup
STRONG
STRONG
5
Place Mug & Pod
Place a mug on the drip tray. If
using a travel mug, remove the drip
tray and place the mug on the drip
tray base. Lift the handle and place
a K-Cup® pod in the K-Cup® pod
holder. Lower the handle completely
to close the lid.
Do not remove the foil lid on the
K-Cup® pod.
2
BREW
OVER
ICE
Remove the water reservoir lid,
then lift the reservoir straight up
to remove it.
Rinse reservoir with fresh water
and fill to the MAX FILL line.
Replace water reservoir, making
sure the lock tabs engage with the
brewer. Replace lid.
NOTE: Do not use distilled water.
4
The 3 cup sizes will blink. Press
the 8oz button, then press the
blinking BREW button to start
a cleansing brew. Pour the hot
water into the sink.
The one-time setup process is
now complete and you are ready
to brew!
HOT
6
The three brew size buttons will blink.
Select your brew size, then press the
blinking BREW button. The BREW
button will remain illuminated while
brewing. Brewing is complete when
the buttons are no longer illuminated.
Lift the handle and dispose of the
K-Cup® pod.
CAUTION: While brewing, there is extremely hot water in the K-Cup® pod holder. To avoid injury, do not lift the handle
during the brewing process.
NOTE: For best results, we recommend one time use with our K-Cup® pods. A twice-brewed pod won't provide full flavor
and if the pod holder isn't lined up with the original holes it can cause an overflow of water and coffee grounds.
Rinse & Fill
Cleansing Brew
OR
BREW
BUTTON
BREW OVER ICE
Brew & Enjoy!
The BREW OVER ICE button will blink.
Select BREW OVER ICE button, then
press the blinking BREW button. The
BREW button will remain illuminated
while brewing. Brewing is complete
when 6oz has been dispensed and the
buttons are no longer illuminated. Lift
the handle and dispose of the K-Cup®
pod.
BREW
BUTTON
1
BREW
OVER
ICE
BREW
BUTTON

Advertisement

loading