Beko BP112C User Manual page 43

7 Installation explanations
2. Cut large strips of adhesive gripping tape to the dimensions of the window. Glue them to the frame of
your window and then do the same on the inner surface of the window flap (on the side of the handle).
3. Glue the widest side (A) of the large white fabric piece to the window frame and then glue the
narrower side (B) to the window leaf (handle side) from the center, then up and finally down.
4. Close the window and make sure the large fabric piece is not stuck in the closing seams and the
window closes always correctly, even with the tapes sticky adhesive tape.
5. Open the window gently and open the zipper of the fabric piece (at level of the bottom or middle of
the window) then insert the exhaust duct into the opening.
Readjust the zipper so that the exhaust duct is attached so that there is no air exchange between
the inside and the outside.
Portable Air-conditioner / User Manual
A
B
A
B
43 / 220 EN