Sunnydaze Decor COPPER FLOWER BLOSSOMS WNC-875 Manual

Read the assembly instructions carefully and follow the care instructions. Keep this manual for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
1
2

ASSEMBLY

1. Locate the water tube on the bottom of the fountain body and firmly connect the electric submersible pump.
TIP: Familiarize yourself with the pump. Water flow is controlled by a switch on the front of the pump. Moving the switch
to (+) increases water flow, (-) decreases water flow.
2. Ensuring the pump remains attached, gently place the fountain body onto the basin.
3. Fill the fountain with enough water to keep the pump fully submerged during operation, approximately 1.5 gallons.
4. Plug the power cord into a properly grounded GFCI outlet.
5. Once you are satisfied with the water flow, gently place the decorative rocks in the fountain, as shown.
Note: When first used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to flow.
WXF02915
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
COPPER FLOWER BLOSSOMS
OUTDOOR WATER FOUNTAIN
Select a smooth, level surface to place the fountain.
Fountain Body
Basin
Electric Submersible Pump
Decorative Rocks
IMPORTANT:
Starting at the base, very slowly and gently push the metal outward until an upward curve is achieved.
Take care not do bend or crease the metal as doing so may crack the painted finish.
The product warranty does not cover damages resulting from shaping/bending metal components.
3
/ / Order/Customer Reference Number:
WNC-875
Parts Qty.
1
1
1
1
PK
After assembly, you may need to shape the leaves to achieve the desired appearance.
11/2022
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
NOTE: The water tubing is built into the fountain.
Take care when handling the water tube; detaching
the water tube from the fountain will damage the
fountain and void the product warranty.
5
4
Page 1 / 2