Osd Warning Messages - Dell S2721HGFA User Manual

OSD warning messages

When the monitor does not support a particular resolution mode, you can see the following
message:
This means that the monitor cannot synchronize with the signal that it is receiving from the
computer. See Monitor specifications
addressable by this monitor. Recommended mode is 1920 x 1080.
You can see the following message before the DDC/CI function is disabled:
You can see the following message When MPRT attempt to work but the frame rate is less than
120Hz :
When the monitor enters the Standby mode, the following message will appear:
Activate the computer and wake up the monitor to gain access to the OSD.
46 | Operating the monitor
Dell 27 Gaming Monitor
The current input timing is not supported by the monitor display. Please
change your input timing to 1920x1080, 144Hz
listed timing as per the monitor specifications.
for the Horizontal and Vertical frequency ranges
Dell 27 Gaming Monitor
The function of adjusting display setting using PC
application will be disabled.
Do you wish to disable DDC/CI function?
Yes
Dell 27 Gaming Monitor
Refresh rate too low, please set refresh rate to 120Hz or higher to turn on MPRT.
Dell 27 Gaming Monitor
Going into Standby mode...
or any other monitor
S2721HGFA
No
S2721HGFA
S2721HGFA
S2721HGFA