Dell S2721HGFA User Manual page 47

Select OSD items of On in Standby Mode in Personalize feature, the following message will
appear:
If adjust the Brightness level above the default level over 75%, the following message will
appear:
If you press any button other than the power button, the following messages will appear
depending on the selected input:
If either DisplayPort, HDMI 1 and HDMI 2 input is selected and the corresponding cable is not
connected, a floating dialog box as shown below appears.
Dell 27 Gaming Monitor
Changing to this setting (without
power consumption,Do you want to continue?
Yes
Dell 27 Gaming Monitor
Adjusting to this value will increase power consumption above the default level.
Do you want to continue?
Yes
Dell 27 Gaming Monitor
No DP signal from your device.
Press any key on the keyboard or move the mouse or wake it up.
If there is no display, press the monitor button again to select the correct
input source.
Dell 27 Gaming Monitor
No DP Cable
The display will go into Standby mode in 4 minutes.
Dell.com/support/S2721HGFA
symbol) will Increase
No
S2721HGFA
No
S2721HGFA
S2721HGFA
S2721HGFA
or
Operating the monitor | 47