Control Buttons - EcoFlow Wave 2 User Manual

Control Buttons

Function
selector
Power button
Press Power-on/Standby.
If Wave 2 is idle for 5 minutes, the LCD and ambient light will turn off automatically
(The power standby time can be set in the app). Press any button to wake them up.
Press and hold Press and hold it for 3 seconds to shutdown.
Function selector
Press Switch cooling
When switching between cooling and heating, there will be 2 minutes of down time*
to protect the device.
Press and hold Press and hold it for 3 seconds to reset Wi-Fi
If reconnection is required, please open the EcoFlow app to reconnect.
* As the operating power may fluctuate during down time, the remaining charge/discharge
time is inaccurate. Please recheck it when Wave 2 starts cooling or heating.
Mode selector (available for cooling/heating only)
Press Switch max
In max mode, Wave 2 operates at high fan speed of 16°C (60°F) for cooling or 30°C
(86°F) for heating by default, and the temperature or fan speed cannot be changed.
In sleep or eco mode, it operates at low fan speed of 26°C (79°F) for cooling or 20°C
(68°F) for heating by default. For eco mode in cooling state, Wave 2 operates for 20
minutes in cooling, then blows air for 10 minutes, and repeats the process.
Press and hold Press and hold it for 3 seconds to switch real-time ambient temperature
real-time air outlet temperature
Temperature+ /
Press Setting temperature and cooling/heating temperature range: 16°C-30°C (60°F-86°F).
The temperature cannot be set when using the fan function .
Press and hold Press and hold the Temperature+ and Temperature- buttons for 3 seconds
to switch temperature units
Mode
Temperature - Temperature + Fan speed
selector
/heating /fan
/sleep /eco /custom modes.
Temperature-
functions.
.
.
Power
button
and Bluetooth .
/
8