Advertisement
Available languages
Available languages
NOTE: Immediately after brewing, the heater thermostat needs to cool down to be
ready for the next brew. Button indicator light may flash when pressing
a few more seconds for heater to cool off before pressing again.
LET ' S MA K E H OT C O FFEE !
1. Plug the coffeemaker in. Press power
brew or blend.
2. Grab desired coffee cup or mug and fill with as much water as you would like
coffee.
TIP: Taller coffee mugs work best to avoid any splashing while brewing.
3. Pour water into the reservoir. Observe how much water your poured on the
water ladder. NOTE: do not pour above 16 oz. max fill line as water reservoir
will overflow.
4. Place reusable coffee filter in brew basket.
5. Using the HOT
correspond to amount of water poured.
HOT BREW
Water
8 oz
12 oz
16 oz
6. Pour coffee grounds into reusable coffee filter. Make sure the basket is properly
placed in for the lid to close. NOTE: if you prefer bolder hot coffee, you can use
an extra ½ - 1 scoops of coffee grounds.
TIP: remove the coffee filter while filling with coffee grounds to prevent
accidental spills into the water reservoir.
7. Close the lid.
8. Place the mug that was used to measure water under the drip spout. Press
button.
9. Optional: Add in your favorite coffee mix-ins for coffee just how you like it. Enjoy!
Frappe Coffeemaker_BVSTDC03B_22SEPM2 (LA).indd 8
Frappe Coffeemaker_BVSTDC03B_22SEPM2 (LA).indd 8
side of the coffee scoop, measure coffee grounds that
Scoop
1
1 ½
2
En g lish -8
button. It will blink slowly in standby for
or
wait
2022/12/7 上午8:57
2022/12/7 上午8:57
Advertisement
