Fisher & Paykel OR60SDBSX2 Using Manual page 4

Hide thumbs Also See for OR60SDBSX2:

If a burner does not light

Check that:

• The cooktop is plugged in and the electricity is switched on.

• The gas is turned on.

• The gas bottle is not empty (if you are using bottled gas).

• You have held down the knob for at least 10 seconds.

• The ignitors are sparking. If the ignitors are not sparking, they may be dirty or wet. Clean them with a toothbrush

and methylated spirits, as shown in Fig. 46.

If the flame is irregular

If the flame is yellow or irregular, check that the burner parts, including the burner cap, are:

• clean and dry.

• positioned correctly. See

• See also

'Cooktop

Matching cookware to burner

Use flat-bottomed pans, and make sure they match the size of the burner, as shown in the following table. A

small pot on a large burner is not efficient.

Diameters of pans which may be used on the cooktop

Burners

Auxiliary

https://producthelp.fisherpaykel.com/au/Cook/Freestanding_Cookers/Electric/OR60SDBSX2/User_Guide_OR60SDBSX2_(59...

Fig. 46 Cleaning the ignitor and probe

'Care and

cleaning'.

troubleshooting'.

Minimum

12 cm (6 cm with small pan support)

Maximum

14 cm

Updated: Mon, 20 Mar 2023 17:44:50 GMT