Function; Parking/Operating Position; Raising/Lowering The Vacuum Bar; Removing The Tanks - Kärcher BR 30/4 C Service Manual

4.6

Function

4.6.1

Parking/operating position

 To operate, the release of the parking position must be
pressed (small arrow) and the appliance has to be swiv-
elled back simultaneously. The parking roller submerg-
es into the cleaning head and the brush roller touches
the floor.
4.6.2

Raising/lowering the vacuum bar

1 Pedal position, vacuum bar raised
2 Vacuum bar lift pedal
3 Pedal position, vacuum bar lowered
The vacuum bars can be raised or lowered using the pedal
for the vacuum bar lift.
NOTICE
Turn the appliance off before you activate the suction bar
lift. Otherwise, the brush drive can be triggered.
The BR 4.300 does not have a suction bar lift.
10
English 5.906-768.0 Rev. 01 (10/20)
4.6.3

Removing the tanks

1 waste water tank
2 Fresh water tank
3 Wastewater inlet opening with seal
4 Suction tube
5 Funnel for fresh water inlet
6 Suction air channel
7 Suction air stub with seal
 The fresh water tank and the waste water tank can be
removed to fill, empty and clean the appliance.
1 Fresh water tank
2 Fresh water tank lock
3 Release of fresh water reservoir
 Pull on the release and remove the fresh water reser-
voir from the appliance toward the front.