Setup Screen; Fig.9 - Control System Setup Screen - Lenovo Neptune DWC RM100 Operation & Maintenance Manual

NOTICE! The following menu screens will only be visible once Logged-in

2.2.7 SETUP Screen

The Setup screen will not normally need to be accessed. Items within this screen will either be set at
the factory, or during commissioning. However, adjustments may need to be made following any site
upgrade.
NOTICE! Information under 'Factory Configuration' (ringed in red below) can be viewed
with Service & Engineer access codes, but to make changes will require a further special
code
Setup - Factory Configuration
ID Title
P001 Primary Return Temp T5
Fitted
Setup - Date & Time
ID Title
Date
P021 Date Format
Time
Setup - Display
ID Title
P030 Screen Saver / Logout
Period
P031 Backlight Period
CDU Operating & Maintenance Guide
Neptune DWC RM100 in-rack Coolant Distribution Unit
Fig.9 – Control System Setup screen
Description
Select according to unit build
Description
Adjust date
Select preferred format
Adjust time (24 hour clock)
Description
Elapsed time before screen saver launches or
display auto logs out
Elapsed time before screen dims
Page
Default
dd/mm/yy
14
Range
Yes - No
Range Unit
- dd/mm/yy
dd/mm/yyyy
mm/dd/yyyy
yyyy/mm/dd
- hh/mm/ss
Default Range Unit
30 1 to 60 mins
10 1 to 60 mins
-
-
-