Vehicle Messages - GMC Chevrolet Cavalier 2022 Owner's Manual

Table of Contents

Advertisement

60
Instruments and Controls
the value. This feature can be turned off by
pressing and holding SET/CLR while viewing
this page. If the selected speed limit is
exceeded, a pop-up warning is displayed and
a chime may sound.
Tire Pressure : If equipped, this page
displays the approximate pressures of all
four tires. See Tire Pressure Monitor System
0 137 and
Tire Pressure Monitor Operation 0 138.
ECO Menu
This menu is only available on some
vehicles. Press MENU on the turn signal
lever until the ECO menu is displayed. Use
to scroll through the menu items.
Not all items are available on every vehicle.
The following is a list of all possible menu
items:
Fuel Economy : The bottom displays the
best average fuel economy (AFE) that is
achieved for a selected distance. The top
displays a running average of fuel economy
for the most recently traveled selected
distance. The center bar graph displays the
instantaneous fuel economy. Quickly press
the SET/CLR button to change the settings
for the distance options.
When viewing best AFE, a several second
press and hold of SET/CLR will reset the best
value.
The display provides feedback on how
current driving behavior in the bar graph
affects the running average in the top
display and how well recent driving
compares to the best that has been
achieved.
Economy Trend : Shows history of the
Average Fuel Economy from the last 50 km
(30 mi). Each bar represents about 5 km
(3 mi) of driving. During driving the bars will
shift to always reflect the most recent
distance on the right side. Press and hold
SET/CLR to reset the trend.
Eco Index : The bar graph on the left hand
side provides feedback on the efficiency of
current driving behavior. The graph shows
a percentage value that is based on current
fuel consumption compared to what is
expected from the vehicle with good and
bad driving habits.

Vehicle Messages

Messages displayed on the DIC indicate the
status of the vehicle or some action that
may be needed to correct a condition.
Multiple messages may appear one after
another.
The messages that do not require
immediate action can be acknowledged and
cleared by pressing SET/CLR. The messages
that require immediate action cannot be
cleared until that action is performed.
All messages should be taken seriously;
clearing the message does not correct the
problem.
If a SERVICE message appears, see your
dealer.
Follow the instructions given in the
messages. The system displays messages
regarding the following topics:
Service Messages
Fluid Levels
Vehicle Security
Brakes
Ride Control Systems
Driver Assistance Systems
Cruise Control

Advertisement

Table of Contents
loading

Table of Contents