Customizing The System Settings - JVC KW-V40BT Instruction Manual

SETTINGS SETTINGS
5
Capture the image displayed on the
screen.
A confirmation message appears. Press [Yes] to
store the newly captured image. (The existing
image is replaced with the new one.)
• Press [No] to return to the previous screen.
1
* Not displayed when playing an external component connected to
the AV-IN1 terminal.
2
* Not displayed when <Full> is selected.

Customizing the system settings

❏ Memorizing/recalling the settings
You can memorize the following settings:
• Settings on the <Settings> screen: Fader/
Balance, Equalizer, Loudness, Crossover
(<HPF>/<LPF>/<SW Level> settings), Volume
Adjust, Speaker Select, Dimmer, Display
Design, AV Input, Camera Input, Navigation
Input
• Settings for "AV-IN": AV-IN Name
Memorizing your settings
1
Display the <User Profile> screen.
On the <HOME> screen:
2
3
Select an item ([User1], [User2] or
[User3]) to memorize the settings.
A confirmation message appears. Press [Yes].
4
Finish the procedure.
Recalling your settings
• Turn off the AV source by pressing [AV Off] on the
<HOME> screen and select "AV Off"* as the rear
source beforehand. *For KW-V40BT
1
Display the <User Profile> screen. (See
the left column.)
2
Select the item you want to recall.
A confirmation message appears. Press [Yes].
3
Finish the procedure.
ENGLISH 37