Changing programs
•
Push the button for 1-2 seconds to switch from one program to the next. Your hearing aids will beep to
confirm the change. The number of beeps indicates which program you have selected.
•
To get back to the default listening program, keep scrolling, or turn your hearing aids off and on again.
NOTE: If you have two hearing aids with synchronization enabled, changing the program on one
hearing aid automatically applies the change to the second hearing aid as well.
Flight mode
You can also use the push button to set the hearing aid in flight mode (wireless mode off). See "Flight Mode /
Wireless Communication Off Mode (optional)", page 26.
Streaming
You can activate streaming from the Jabra Enhance Select app.
Using a telephone
Your hearing aid allows you to use your telephone as you normally do. Finding the
optimal position for holding the phone may require practice.
The following suggestions may be helpful:
1. Hold the telephone up to your ear canal or hold it close to the hearing aid
microphones as illustrated.
2. If you hear whistling, try holding the telephone in the same position for a few
seconds. The hearing aid may be able to cancel the whistling.
3. You can also try holding the telephone slightly away from the ear.
22
Need help?
Do you have a question about the ENHANCE SELECT 200 and is the answer not in the manual?
Questions and answers