Jabra ENHANCE SELECT 200 User Manual page 17

Inserting the receiver dome into your ear
1. Hang the hearing aid over the
top of your ear.
NOTE:
•
To avoid whistling, ensure that the wire and dome fit correctly into your ear. If you continue to
experience whistling, check the troubleshooting guide for other possible reasons and solutions.
•
If the receiver wire of the hearing aid does not rest against the side of your head, try using a smaller
dome size. (See page 32 for dome replacement). If the hearing aid wire is not resting against the side
of your head, a new receiver length may also be needed (See "Replacing the receivers", page 39).
2. Hold the receiver wire where it
bends and gently place/push
the receiver dome into your ear
canal.
17
3. Push the dome far enough into
your ear canal so that the wire
rests against your head. You
can check in a mirror.