ABB VSN730 Product Manual page 20

3. Select SunSpec Compatible Device as the Device Type from the pull-down menu.
4. Set the Slave Id field to the Modbus address of the weather station. Note that for the VSN800-
12 and VSN800-14 weather station models the default Modbus address is 60.
5. Enter a Description to help you identify the device if you need to change configurations later.
6. Click the Add button.
7. The device will be added to the Devices page, listed under the Primary RS-485 port.
8. Press the Save icon at the top to commit changes.
9. After making changes, you are returned to the Devices page with the status indicators, as
shown below. It may take some time for the weather station to report data and for all the status
lights on the left to turn green.
VSN730 System Monitor Product Manual
20 -
-