Basic Play - Panasonic DVD-S43 Operating Instructions Manual

Basic play

1
Power ON.
3
Load the disc.
≥ Load double-sided discs so the label for the
side you want to play is facing up.
≥DVD-RAM: Remove discs from their
cartridges before use.
Skip
≥ Press [:9] to skip chapters, tracks, etc.
≥ [DVD-VR] Can also skip to the markers.
Stop
The position is memorized when "!" flashes on the display.
≥ Press [1] (PLAY) to resume. (Resume play)
≥ Press [∫] to clear the position.
Standby/on switch (Í/I)
Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
8
Remote control sensor
Stop
[Note]
≥DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [∫]
when you finish to preserve the unit's motor and your television screen.
≥ To play [MP3] or [JPEG] contents on DVD-RAM, set "DVD–VR/DATA" to "DATA" (➜ 17,
"OTHERS" menu).
≥ Total title number may not be displayed properly on iR/iRW.
If you are experiencing problems, refer to troubleshooting guide (➜ 19, 20).
2
Open the disc tray.
4
Start play.
Search
(during play)
Slow-motion
(during pause)
≥ Up to 5 steps
≥ Press [1] (PLAY) to restart play.
≥ [VCD] Slow-motion: forward direction only
≥ [MPEG4] [DivX] Slow-motion: Does not work.
Pause
≥ Press [1] (PLAY) to restart play.