Panasonic DVD-S43 Operating Instructions Manual page 20

Troubleshooting guide
Progressive video
≥ This problem is caused by the editing method or material
There is ghosting
when progressive used on DVD-Video, but should be corrected if you use
output is on. interlace output. Change "VIDEO OUT (I/P)" in "VIDEO"
menu to "INTERLACE". (16)
≥ If the unit is connected to the television through VIDEO OUT
Pictures not in
progressive or S VIDEO OUT terminal output will be interlace.
output.
≥ When progressive output is on, closed captions will not be
Closed captions
displayed.
not displayed.
Sound incorrect
≥ Set ADVANCED SURROUND to "OFF". (10)
Sound distorted.
≥ If you have connected a digital amplifier which does not
Piercing noise
comes from the include decoder, be sure to select "PCM" in
speakers. "DOLBY DIGITAL" or "DTS" in "AUDIO" menu. (17)
≥ None of the audio effects work when the unit is outputting
Effects do not
work. bitstream signals from the COAXIAL terminal. (7)
≥ Some audio effects do not work or have less effect with
some discs.
≥ ADVANCED SURROUND does not work if you have
changed the play speed. (9)
≥ There may be a pause in sound when you change the play
No sound
speed.
≥ [DivX] Audio may not be output due to how files were
created. (5)
Recording
≥ You cannot record WMA/MP3.
Cannot record to
≥ You cannot record DVDs that have protection preventing
digital recording
equipment. digital recording.
≥ You cannot record DVDs if the recording equipment cannot
(Incorrect sound
recorded.) handle signals with a sampling frequency of 48 kHz.
≥ Make the following settings:
– ADVANCED SURROUND:
– PCM OUTPUT:
– DOLBY DIGITAL/DTS:
Unit displays
≥ You inserted a disc the unit cannot play; insert one it can. (4)
≥ You inserted a blank disc.
≥ You inserted a disc that has not been finalized. (4)
≥ The disc may be dirty. (21)
≥ You haven't inserted the disc correctly: Insert it correctly. (8)
20
The number
following "H"
depends on the
status of the unit.
Television displays
"ERR H∑∑"
(∑∑ stands for a
number.)
"ERR U11"
"/"
"NO DISC"
"CANNOT PLAY
AUDIO"
"NO AUDIO"
"THIS TYPE OF
DISC CANNOT BE
PLAYED. PLEASE
INSERT A
DIFFERENT
DISC."
"THIS DISC MAY
OFF (10)
NOT BE PLAYED
UP TO 48 kHz (17)
IN YOUR
PCM (17)
REGION."
"AUTHORIZATION
ERROR"
"RENTAL
EXPIRED"
≥ Trouble may have occurred. Turn the unit off and then back
to ON. Alternatively, turn the unit off, disconnect the AC
power supply cord, and then reconnect it.
≥ If the service numbers fail to clear, note the service number
and contact a qualified service person.
≥ You haven't inserted a disc: Insert one.
≥ You haven't inserted the disc correctly: Insert it correctly. (8)
≥ Trouble may have occurred. The number following "ERR H"
depends on the status of the unit. Turn the unit off and then
back to ON. Alternatively, turn the unit off, disconnect the AC
power supply cord, and then reconnect it.
≥ If the service numbers fail to clear, note the service number
and contact a qualified service person.
≥ The disc may be dirty. (21)
≥ You haven't inserted the disc correctly: Insert it correctly. (8)
≥ The operation is prohibited by the unit or disc.
≥ You haven't inserted a disc: Insert one.
≥ You haven't inserted the disc correctly: Insert it correctly. (8)
≥ Audio has not been recorded, or recorded in a format this
unit cannot playback. Video playback only is possible. (5)
≥ You inserted a disc the unit cannot play; insert one it can. (4)
≥ You inserted a disc that has not been finalized. (4)
≥ You inserted a blank disc.
≥ You can only play DVD-Video if their region number is "1",
"ALL" or multiple region numbers including "1". (Cover)
≥ You are trying to play the DivX VOD content that was
purchased with a different registration code. You cannot play
the content on this unit. (13)
≥ The DivX VOD content has zero remaining plays. You
cannot play it. (13)